Test booth
Enclosed booth for burst and vacuum testing. Frame, panels, pneumatics and controls all shipped complete from our plant.
Machines built around your process
We survey the process on your floor and build the machine it calls for, with our own fabrication and our own controls.
The visit is free, with no obligation to buy · +52 81 8706 7945
Equipment already in production
Compressor lift-assist manipulator
Suspended material handling on an assembly line. Takes the strain off the operator and the damage off the part.
Suction plate for a fin press
Designed, built and installed on the customer's fin press.
Leak and vacuum test station
Instrumented workstation with an HMI and a stack light in the supervisor's line of sight.
Lubrication test station
Lubrication pump integrated in its own cabinet, with controls and HMI. The OEM's equipment sits inside our control panel.
What happens during the visit
Before quoting a machine, you have to see where it will live. An hour on your floor saves weeks later.
01We watch the operation running
With the operator who does it today. That is where the constraints no drawing shows come out.
02We measure the real space
Available footprint, clearances, access, and where air and power will come from.
03We define the scope
What the machine has to do, what stays manual, and what it integrates with.
04We quote in writing
Scope, lead time and price. No obligation to buy.
You may not need a machine
Sometimes the operation is solved with a fixture or with a retrofit of the equipment you already have, at a fraction of the cost. If that is your case, we tell you during the visit, even when it means a smaller project for us.
One signature
Concept, mechanical design, electrical design, fabrication, control panel, programming, commissioning and service. All under the same responsible party, with no suppliers to coordinate with each other.
Eight stages, one supplier
This is the complete list of what goes into a machine project, and we sign for all of it. One point of contact, from drawing to commissioning.
01Concept
On-site survey and definition of the solution with your team.
02Mechanical design
3D modeling, engineering calculations and fabrication drawings.
03Electrical design
Control schematics, component selection and panel layout.
04Fabrication
CNC machining, EDM, welding and frame fabrication in our own plant.
05Control panel and wiring
Built with VFDs, servo drives and safety components.
06Programming
PLC and HMI, with screens in the operator's language.
07Commissioning
Installation at your plant, testing and training.
08Service
Spare parts, adjustments and ongoing support.
What we replace
Almost no project starts from zero. The safety function is usually already there; what is missing is having it built as equipment instead of improvised on the floor to get by.
Before
After
What engineers ask us before we quote a machine
The questions that come up on the first call. If yours isn't here, send it on WhatsApp.
Is there a charge for the plant visit?
No. The visit is free, with no obligation to buy. We watch the operation running with the operator who does it today, measure the real space (footprint, clearances, access, where air and power will come from) and define the scope. That gives you a written quote with scope, lead time and price.
Do you do the design, or only build what I already designed?
Both. A complete machine project has eight stages: concept, mechanical design, electrical design, fabrication, control panel, programming, commissioning and service. We sign for all of them, with one point of contact. If you already have a design, we come in at whatever stage you need.
What if my problem doesn't need a machine?
We tell you during the visit. Sometimes the operation is solved with a fixture or with a retrofit of the equipment you already have, at a fraction of the cost of a new machine. We say so even when it means a smaller project for us.
Do you outsource fabrication?
No. CNC machining, EDM, welding and the frame all come out of our own plant in Monterrey. That is why a late design change doesn't turn into a three-week wait on an outside supplier: it gets solved on our own shop floor.
Who programs the PLC and who trains the operator?
We do. PLC and HMI programming is part of the scope, with screens in the operator's language. Commissioning includes installation at your plant, testing and training, and after that comes service: spare parts, adjustments and support.
How fast do you respond?
Within one business day, with scope and an estimated timeline. We work Monday to Friday, 9 a.m. to 6 p.m. (Monterrey time, CST). WhatsApp at +52 81 8706 7945 is the fastest channel.
Tell us about the operation
Describe what needs solving on your line. We reply within one business day and, if the project warrants it, schedule the visit.