We build in-house what we install
We don't subcontract the core of the project. From the prototype part to the production run, in our own plant in Monterrey, N.L.
Tolerances we hold
Not the numbers from the machine catalog. These are the ones we sign on a purchase order and repeat part after part.
Wire EDM
EDM- Tolerance
- ±0.0001″ / ±0.0025 mm
CNC machining center
Milling- Tolerance
- ±0.0005″ / ±0.013 mm
EDM
Wire EDM and EDM hole drilling for geometry a cutter can't produce, and for steel that arrives already hardened. When a part needs sinker EDM, we coordinate it with an outside partner.
Fanuc Robocut α-1iA
Wire EDM- X · Y · Z travels
- 520 × 370 × 305 mm
20.5 × 14.6 × 12.0″ - Max. workpiece thickness
- 305 mm / 12.0″
- Taper
- ±12°
Mitsubishi FX10
Wire EDM- X · Y · Z travels
- 350 × 250 × 220 mm
13.8 × 9.8 × 8.7″ - Max. workpiece thickness
- 215 mm / 8.5″
- Taper
- ±15° up to 100 mm / 4″
Charmilles HD8
EDM hole drill- Table
- 600 × 300 mm / 23.6 × 11.8″
- Electrode diameter
- 0.3 to 6.35 mm
0.012 to 0.250″ - Max. depth
- 200 mm / 7.9″
- Table load
- 400 kg / 880 lb
Machining centers
If your part fits these travels, it gets made here. If it doesn't, we tell you before we quote.
Hyundai WIA VX500
Vertical machining center · 4-axis- X · Y · Z travels
- 1060 × 510 × 635 mm
41.7 × 20.1 × 25.0″ - Table
- 1200 × 500 mm
47.2 × 19.7″ - Table load
- 1200 kg / 2645 lb
Hurco VMX24
Vertical machining center- X · Y · Z travels
- 610 × 508 × 610 mm
24.0 × 20.0 × 24.0″ - Table
- 762 × 510 mm
30.0 × 20.1″ - Table load
- 1500 kg / 3300 lb
- Spindle taper
- CAT 40
Mori Seiki MV-45/40 × 2
Vertical machining center- X · Y · Z travels
- 800 × 457 × 500 mm
31.5 × 18.0 × 19.7″ - Table
- 1092 × 450 mm
43.0 × 17.7″ - Table load
- 700 kg / 1540 lb
- Spindle taper
- CAT 40
Turning
Round parts for the fixture itself or for the customer's machine.
Daewoo Puma 10 HC × 2
CNC lathe- Swing over bed
- 500 mm / 19.7″
- Max. turning diameter
- 370 mm / 14.6″
- Max. turning length
- 525 mm / 20.7″
- Bar capacity
- 75 mm / 2.95″
- Chuck
- 254 mm / 10″
Hardinge Conquest GT-27SP
Super-precision lathe- Swing
- 298 mm / 11.8″
- Machining length
- 284 mm / 11.2″
- Bar capacity
- 27 mm / 1.06″ · 5C collet
- Max. spindle speed
- 6000 rpm
Grinding and support
Finishing, cutting and joining. What closes out the part after machining.
Blohm Simplex 7
Surface grinder- Grinding area
- 350 × 700 mm
14 × 27.5″ - Table
- 1100 × 300 mm
43.3 × 11.8″ - Table load
- 408 kg / 900 lb
Surface grinder
Grinding- Capacity
- 15 × 20″ / 381 × 508 mm
Cylindrical grinder
Grinding- Application
- Round parts and inserts
Bridgeport with digital readout
Knee mill- Control
- DRO
- Application
- Bench work and fitting
Cutting, finishing and welding
Support- Band saw
- Max. cut 12″ / 305 mm
- Finishing
- Shot blasting machine
- Joining
- MIG and TIG welding
Materials and heat treatment
We run every industrial steel, tool steels included. Parts that arrive already hardened go to wire EDM, where hardness stops being an obstacle.
Vacuum heat treatment is done by a specialized supplier, to the hardness the customer specifies. It is the only step that leaves the plant: machining, EDM, grinding and welding are ours.
No minimum volume. A single spare part is quoted the same way as a batch, because that is the most common case: the wear part the original manufacturer no longer supplies.
A last-minute change to a machine design doesn't turn into a three-week wait on an outside supplier. It gets solved the same day, one floor down.
Laurel 1616, Col. Moderna, Monterrey, N.L. 64530, Mexico
Lead times
Typical ranges, not guarantees. Part complexity and shop load move them, which is why the firm lead time goes in writing on the quote.
Simple spare part
Machining and EDM- Typical lead time
- 3 to 5 business days
Complete machine project
All eight stages- Typical lead time
- 8 to 12 weeks
Send us the drawing
A print, a photo of the part or a one-line description of the problem. That's enough to get started.
Request a quote